SONIC® 4000 active probe, DC to > 4GHz, ±8V, 1MΩ, 10:1, single ended

Robust Active Probe for Troubleshooting Sonic® 4000

■ ±8V Dynamic Input Range, 20V Maximum

■ ±12V Input Offset Voltage

■ Single-ended

■ Short-circuit prevention due to high-impedance reference connection

■ 2MΩ / 0.6pF Input Impedance

■ Universal Use with BNC Connector

■ Output Termination 50Ω AC/DC

■ Variety of Accessories for individual Contacting

■ Remote Control with power supplies PS-02/03

■ Power Supply to be ordered seperately

The Sonic® 4000 active probe offers best-in-class performance and is easy to use to make in-circuit measurements. With the Sonic® 4000's DC to > 4GHz bandwidth, high input impedance, low noise and ± 8V dynamic range makes it the ideal probe to use with any oscilloscope or other 50Ω measurement system. Sonic® 4000's ± 12V input offset capability extends the input voltage range of the probe. The input capacitance of <0.6pF parallel 2MΩ between probe tip and probe reference (1MΩ to the oscilloscope ground) provides the highest impedance in its class to allow the probing of sensitive circuits without adversely loading the circuit under test.

Sonic Series’ DC offset can be controlled via remote control.

A PMK power supply unit is required. These are available with a USB interface and are optionally available with a LAN interface. Remote control of the probe is made possible by the power supply unit.

The exact range of functions of the probes is described on the page linked below for the respective software solution.

Several software solutions are available for remote control of PMK products.

The 1 channel battery pack power supply AP-01 provides >8h of portable and isolated operation, which allows the user the flexibility of where the probe can be used.

The AP-01 supplies power only to the probe with no software remote control.

Find out more about AP-01 here

The cable length of 1.3m can be customized on request.

Sonic® 4000 Scope of Delivery

Quantity refers the total amount of referenced article (not quantity times set of x)

	Quantity	Article
	1x	SONIC® 4000
	1x	Sonic® 4000 2-footer positioner
	1x	Sonic® 4000 initial factory calibration certificate
	1x	Sonic® 4000 instruction manual
	1x	Sonic® 4000 probe case
	2x	Self-adhesive Cu Pad (2cm x 2cm)
	1x	Ground blade
	1x	Z-Ground
	3x	Ground Leaf
	1x	QFP IC-Clips 0.4 - 0.8 mm pitch (1 Pair, yellow/green), short
	1x	Pico Hook™ (black)
	1x	Pico Hook™ (red)
	1x	Y-Lead adapter to 0.8 mm Sockets
	1x	Ground lead 90° 5cm
	1x	Ground lead 7cm
	1x	Ground lead 90° 10cm
	1x	90° L-In Adapter to 0.8 mm socket
	2x	Sonic® 2.54mm adapter
	5x	PCB Adapter
	3x	Solid Tip
	3x	Spring tip
	1x	Probe connection cable 0.6 m

Models & Specifications

			Order number	Article	Attn.	B/W	Max Input Voltage	Input Impedance	Dynamic Range
$4,241.00 USD Qty available: 1		Datasheet Manual	884-000-000	SONIC® 4000	10:1	4 GHz	20 V	1 MΩ \|\| 0.6 pF	± 8 V

Power Supplies for the Sonic® 4000

Not included in the Sonic® 4000 probe head's scope of delivery. A power supply is needed to operate the Sonic® 4000 probe head.

		Order number	Article	Input Voltage	Output Current (max.)	Noise	Channels	Power
$1,186.00 USD Qty available: 1	Datasheet	889-09V-PS2	2ch Power supply for remote control with USB interface	100-240 V AC, 47-63 Hz	550 mA / channel	8 mV	2	20 W
$1,739.00 USD Lead time 8-10 weeks	Datasheet	889-09V-PS2-L	2ch Power supply for remote control with USB and LAN interface	100-240 V AC, 47-63 Hz	550 mA / channel	8 mV	2	20 W
$1,573.00 USD Lead time 8-10 weeks	Datasheet	889-09V-PS3	4ch Power supply for remote control with USB interface	100-240 V AC, 47-63 Hz	550 mA / channel	4 mV	4	40 W
$2,127.00 USD Qty available: 1	Datasheet	889-09V-PS3-L	4ch Power supply for remote control with USB and LAN interface	100-240 V AC, 47-63 Hz	550 mA / channel	4 mV	4	40 W
$1,573.00 USD Lead time 8-10 weeks	Datasheet Manual	889-09V-AP01	1ch Battery pack, >8hrs operation, no remote control		700 mA DC		1	20 W
$277.00 USD Lead time 8-10 weeks		890-520-915	Probe connection cable 1.6 m

Learn more about our Power Supplies

SONIC® 4000 accessories

More about Sonic® accessories can be found here: Sonic® accessories

	Model number	Article	Clamping range	Connector
$28.00 USD Qty available: -4	890-400-811	Z-Ground
$12.00 USD Lead time 8-10 weeks	P25-2	Pico Hook™ (red)	up to Ø 1 mm	Pin 0.64 mm
$12.00 USD Lead time 8-10 weeks	P25-0	Pico Hook™ (black)	up to Ø 1 mm	Pin 0.64 mm
$54.00 USD Lead time 8-10 weeks	893-250-4SO	Sonic® 4000 2-footer positioner
$118.00 USD Lead time 8-10 weeks	890-502-130	QFP IC-Clips 0.4 - 0.8 mm pitch, (1 Pair, yellow/green), long	0.4 - 0.8 mm	Pin 0.64 mm
$150.00 USD Lead time 8-10 weeks	890-502-300	QFP IC-Clips 0.2 - 0.5 mm pitch (1 Pair, yellow/green), short	0.2 - 0.5 mm	Pin 0.64 mm
$95.00 USD Lead time 8-10 weeks	890-502-000	QFP IC-Clips 0.4 - 0.8 mm pitch (1 Pair, yellow/green), short	0.4 - 0.8 mm	Pin 0.64 mm
$43.00 USD Lead time 8-10 weeks	890-720-840	Y-Lead adapter to 0.8 mm Sockets
$28.00 USD Lead time 8-10 weeks	890-400-804	Ground lead 90° 10cm
$23.00 USD Lead time 8-10 weeks	890-400-808	Ground lead 7cm
$25.00 USD Lead time 8-10 weeks	890-400-803	Ground lead 90° 5cm
$26.00 USD Lead time 8-10 weeks	890-400-809	Ground lead 13cm
$122.00 USD Lead time 8-10 weeks	891-025-810	Set of 25 2.54 mm adapters
$54.00 USD Lead time 8-10 weeks	891-010-810	Set of 10 2.54 mm adapters
$28.00 USD Lead time 8-10 weeks	891-010-815	Set of 25 PCB adapters
$15.00 USD Lead time 8-10 weeks	891-010-814	Set of 10 PCB adapters
$20.00 USD Lead time 8-10 weeks	890-500-801	90° L-In Adapter to 0.8 mm socket
$40.00 USD Lead time 8-10 weeks	890-800-000	Set of 5 Solid Tips
$135.00 USD Lead time 8-10 weeks	890-800-001	Set of 5 Spring Tips
$8.00 USD Lead time 8-10 weeks	890-100-150	Set 10 self-adhesive CU Pads, 2 x 2 cm
$40.00 USD Qty available: 0	890-400-813	Ground Leaf
$28.00 USD Qty available: 0	890-400-812	Ground blade

Sonic® 4000 active probe

Name: SONIC® 4000 active probe, DC to > 4GHz, ±8V, 1MΩ, 10:1, single ended
Brand: PMK America Corporation
SKU: 884-000-000
Price: 4241.00 USD
Availability: InStock

Filter and sort

1 product