2.5mm diameter Low-Z Probe Series PML
■ Up to 1.5 GHz bandwidth, up to 30V, 50Ω
■ 1:1, 10:1, 100:1 models
■ Slim 2.5mm probe tip
■ Replaceable 0.5mm spring tip
■ Variety of accessories for individual contacting
■ Universal use with BNC connector
■ Output termination 50Ω AC/DC
■ W/o read-out available
The compact design of the PML probe series with only 2.5mm housing diameter at the probe tip is ideal for measurements on the smallest components and hard-to-reach measuring points, as it allows a far better view of the component under test than conventional 5mm probe housing designs. The actual probe tip is only 0.5mm thick, gold plated and spring loaded.
Individual contacting with high signal fidelity in different applications is ensured with the replaceable spring tip and a variety of contacting accessories. Especially for RF measurements at the IC a shortest possible ground connection is necessary. BNC and PCB solder-in solutions are available. Conventional adaptations cause additional inductance and resonance into the measurement circuit due to long leads and thus distort the measurement signal. This is where the innovative IC contacting system of the PML series, consisting of 5 different IC caps for pin spacing from 0.5mm to 1.27mm, the innovative ground blade and the copper pad for gluing onto the IC, offers the ideal solution for short-circuit-proof, reproducible and accurate measurements.
PMK's passive probes PML are available with or without intelligent read-out (RO) function, featuring intelligent communication with automatic scaling on the oscilloscope display.
All probes are calibrated at the end of production. A factory calibration certificate is optional.
Read-Out (RO) in our probes is a physical pin, positioned in the BNC adapter. This read-out pin allows automatic adjustment of the oscilloscope's settings, like scaling, based on the probe's attenuation factor so that the read out on the probe is correct.
1:1 Models & Specifications
| Order number | Article number | B/W | Input Voltage | Input Impedance | Rise Time | Cable Length | |||
|---|---|---|---|---|---|---|---|---|---|
|
855-701-000 | PML 701 | 38 MHz (1) | 30V | 39 pF + scope | 9 ns | 1.3 m | ||
|
855-701-00E | PML 701-RO | 38 MHz (1) | 30V | 39 pF + scope | 9 ns | 1.3 m | ||
10:1 Models & Specifications
| Order number | Article number | B/W | Input Voltage | Input Impedance | Rise Time | Cable Length | |||
|---|---|---|---|---|---|---|---|---|---|
|
875-751-000 | PML 751 | 1.5 GHz (1) | 12V DC inkl. AC peak | 500 Ω || 1.8 pF | 240 ps | 1.3 m | ||
|
875-751-001 | PML 751-RO | 1.5 GHz (1) | 12V DC inkl. AC peak | 500 Ω || 1.8 pF | 240 ps | 1.3 m | ||
|
875-751-SMA | PML 751 SMA | 1.5 GHz (1) | 12V DC inkl. AC peak | 500 Ω || 1.8 pF | 240 ps | 1.3 m | ||
100:1 Models & Specifications
| Order number | Article number | B/W | Input Voltage | Input Impedance | Rise Time | Cable Length | |||
|---|---|---|---|---|---|---|---|---|---|
|
875-791-000 | PML 791 | 1.5 GHz (1) | 30V DC inkl. AC peak | 5 kΩ || 2.2 pF | 240 ps | 1.3 m | ||
|
|
875-791-002 | PML 791-RO | 1.5 GHz (1) | 30V DC inkl. AC peak | 5 kΩ || 2.2 pF | 240 ps | 1.3 m | ||
|
|
875-791-SMA | PML 791 SMA | 1.5 GHz (1) | 30V DC inkl. AC peak | 5 kΩ || 2.2 pF | 240 ps | 1.3 m | ||
3D positioners for our PML Low-Z Probe Series
We recommend using our sturdy, yet versatile 3D-positioners to securely hold your passive probes in any orientation or place. Learn more about our 3D-positioners.
| Order number | Article | Base | Arm | Probe Holder | |||
|---|---|---|---|---|---|---|---|
|
893-350-001 | MSA 100 | 1200 g Steel Base | 200 mm | HAL 512 | ||
|
893-350-008 | MSA130 | 1200 g Steel Base | 130 mm | HAL 512 | ||
|
893-350-002 | MSB 40 | Table Clamp | 200 mm | HAL 512 | ||
|
893-350-003 | MSC 85 | Table Clamp | 200 mm | HAL 512 | ||
|
893-350-004 | MSM 130 | Magnet Foot | 130 mm | HAL 512 | ||
|
893-350-005 | MSM 200 | Magnet Foot | 200 mm | HAL 512 | ||
|
893-350-006 | MSU 1500 | 1200 g Steel Base | 200 mm | UNIHOLDER | ||
PML Low-Z Probe Series
8 products
Sidebar
Visual separator
Intermag 2025 | Booth 5
Visual separator
Embedded World 2025
Visual separator
APEC 2025 | Booth 1846
Visual separator
EPE 2025 | Booths 07, 08
Visual separator
ECCE U.S. 2025
Visual separator
Embedded World NA 2025
