5mm diameter Passive Probe Series PMM
■ Up to 500 MHz bandwidth, up to 30V, 50Ω
■ 10:1 models
■ 5mm probe tip
■ Replaceable 0.38mm spring tips
■ Optional solder-in BNC and PCB adapters
■ Variety of accessories for individual contacting
■ Universal use with BNC connector
■ Output termination 50Ω AC/DC
■ W/o read-out available
The compact design of the PMM probe series and a wide range of accessories allow for easy and individual adaptation.
The high input resistance and the low input capacitance allow measurements with lowest DUT load.
Read-Out (RO) in our probes is a physical pin, positioned in the BNC adapter. This read-out pin allows automatic adjustment of the oscilloscope's settings, like scaling, based on the probe's attenuation factor so that the read out on the probe is correct.
Models & Specifications
| Order number | Article number | B/W | Input Voltage | Input Impedance | Rise Time | Cable Length | |||
|---|---|---|---|---|---|---|---|---|---|
|
855-515-A01 | PMM 515A-RO | 175 MHz | 300 V CAT II (1) | 10 MΩ || 23 pF | 2 ns | 5 m | ||
|
855-515-A00 | PMM 515A | 175 MHz | 300 V CAT II (1) | 10 MΩ || 23 pF | 2 ns | 5 m | ||
|
855-513-A01 | PMM 513A-RO | 250 MHz | 300 V CAT II (1) | 10 MΩ || 18 pF | 1.4 ns | 3 m | ||
|
855-513-A00 | PMM 513A | 250 MHz | 300 V CAT II (1) | 10 MΩ || 18 pF | 1.4 ns | 3 m | ||
|
855-512-A01 | PMM 512A-RO | 380 MHz | 300 V CAT II (1) | 10 MΩ || 13.5 pF | 0.95 ns | 2 m | ||
|
855-512-A00 | PMM 512A | 380 MHz | 300 V CAT II (1) | 10 MΩ || 13.5 pF | 0.95 ns | 2 m | ||
|
855-511-A01 | PMM 511A-RO | 500 MHz | 300 V CAT II (1) | 10 MΩ || 11 pF | 700 ps | 1.2 m | ||
|
855-511-A00 | PMM 511A | 500 MHz | 300 V CAT II (1) | 10 MΩ || 11 pF | 700 ps | 1.2 m | ||
3D-Positioners for our 5mm diameter Passive Probe Series PMM
We recommend using our sturdy, yet versatile 3D-positioners to securely hold your passive probes in any orientation or place. Learn more about our 3D-positioners.
| Order number | Article | Base | Arm | Probe Holder | |||
|---|---|---|---|---|---|---|---|
|
893-350-001 | MSA 100 | 1200 g Steel Base | 200 mm | HAL 512 | ||
|
893-350-008 | MSA130 | 1200 g Steel Base | 130 mm | HAL 512 | ||
|
893-350-002 | MSB 40 | Table Clamp | 200 mm | HAL 512 | ||
|
893-350-003 | MSC 85 | Table Clamp | 200 mm | HAL 512 | ||
|
893-350-004 | MSM 130 | Magnet Foot | 130 mm | HAL 512 | ||
|
893-350-005 | MSM 200 | Magnet Foot | 200 mm | HAL 512 | ||
|
893-350-006 | MSU 1500 | 1200 g Steel Base | 200 mm | UNIHOLDER | ||
PMM Probe Series
8 products
Sidebar
Visual separator
Intermag 2025 | Booth 5
Visual separator
Embedded World 2025
Visual separator
APEC 2025 | Booth 1846
Visual separator
EPE 2025 | Booths 07, 08
Visual separator
ECCE U.S. 2025
Visual separator
Embedded World NA 2025
