| Item | Sub-item | Specification |
|---|---|---|
| Measurement method | CROSS-POWER method (Compatible to IEC62044-3 standard) | |
| Measurement item (Symbol) |
Max. Magnetic flux density (Bm), Residual magnetic flux density (Br), Max. Magnetic field strength (Hm), Coersive force (Hc), Rectangular ratio (Br/Bm), Relative amplitude permeability (μa), Core loss (Pc, Pcv, Pcm), Primary excitation current (I1m), Secondary induced voltage (V2m), Phase (θ), Total magnetic flux linkage (2φm), Apparent power (VA), Impedance permeability (μz), Complex permeability (μ′, μ″), Loss coefficient (tanδ), Inductance (L), Resistance (R), Impedance (|Z|), Quality factor (Q), Total harmonic distortion (THD) |
|
| Waveform display | B-H curve, Primary current, Secondary voltage, Magnetic field, Flux density | |
| Test | SINE | 10Hz - 1MHz (SY-8264) ※1MHz-30MHz as optional |
| Test | PULSE | 10Hz - 1MHz |
| Magnetic field detection | Voltage detection on non-inductive shunt, Max. current at ±6A | |
| Flux density detection | Voltage at detection coil, Max. voltage at ±200V | |
| Digitizer | Resolution: 16bits (8192 points/cycle) | |
| Coil method | Two winding method or single winding method selectable | |
| Display | 8.4 inch TFT-LCD SVGA 800 x 600pixel | |
| Weight, Dimensions | Approx. 11.2kg, Approx. 420W x 266H x 450D (mm) | |
| External output | USB (storage), LAN (remote control) ※Remote command disclosure |
Limited availability of legacy models SY-8218 and SY-8219.
| Order number | Article | |||
|---|---|---|---|---|
|
SY-8264 | *** NEW *** B-H Analyzer Main Frame, Base Model, 10Hz to 1MHz, including SY-955 measurement POD and standard sample type A. Includes new remote-control software SY-820. | ||
|
SY-8219 | *** LIMITED SUPPLY *** B-H Analyzer Main Frame, 10Hz to 1MHz, with SY-955 measurement POD and standard sample type A (requires SY-810) | ||
|
SY-8218 | *** LIMITED SUPPLY *** B-H Analyzer Main Frame, 10Hz to 10MHz, with SY-951 measurement POD and standard sample type A (requires SY-810) | ||
Configure your SY-8264 Series B-H Analyzer with an optional factory-preset excitation frequency range to best suit your application. The standard excitation frequency range is 10 Hz to 1 MHz.
| Order number | Article | |||
|---|---|---|---|---|
|
|
SY-602 | 30MHz Factory preset option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-601 | 20MHz Factory preset option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-600 | 10MHz Factory preset option for SY-8264 B-H Analyzer Main Frame | |
Already own an IWATSU SY-8264 Series B-H Analyzer and want to upgrade its excitation frequency range? Choose your preferred range below.
| Order number | Article | |||
|---|---|---|---|---|
|
|
|
SY-608 | 20MHz to 30MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-605 | 1MHz to 30MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-604 | 1MHz to 20MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-603 | 1MHz to 10MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-607 | 10MHz to 30MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
|
|
|
SY-606 | 10MHz to 20MHz Upgrade option for SY-8264 B-H Analyzer Main Frame | |
At higher excitation frequencies, rising impedance can make it more difficult to supply sufficient excitation energy. A power amplifier addresses this by increasing the SY-8264 output signal. The excitation signal is routed from the SY-8264 to the amplifier, amplified, and then returned to the measurement pod to drive the DUT.
More models coming soon!
| Order number | Article | |||
|---|---|---|---|---|
|
SY-5001 | 4-Quadrant Power Amplifier for use with IWATSU® SY-821x and SY-8264, DC – 5 MHz, ±150 V, ±6 A, 800 V/µs, GPIB-, USB- Interface | ||
Display of the SY-8264 Series
Comparison Conditions
SY-8264 (New Model): 10 Hz to 30 MHz
SY-8218 (Legacy Model): 10 Hz to 10 MHz
Material: TN6D Ferrite (NiZn)
Method: 2-coil method
Comparison of TN6D Ferrite(NiZn) measurements: New model (SY-8264) vs. old model (SY-8218)
Complex permeability u',u", Bm= 3mT
Relative loss factor tan6/pi, Bm= 3mT
| Measurement items | ||
|---|---|---|
| Symbol | Typical unit | Meaning |
| Bm | [T] | Max. magnetic flux density |
| Br | [T] | Residual magnetic flux density |
| Hm | [A/m] | Max. magnetic field |
| I1m | [A] | Max. exciting current |
| Hc | [A/m] | Coersive force |
| Br/Bm | — | Rectangular ratio |
| μa | — | Relative amplitude permeability |
| Pc | [W] | Core loss |
| Pcv | [W/m3] | Core loss per volume |
| Pcm | [W/kg] | Core loss per mass |
| θ | [deg] | Phase angle |
| 2Φm | [Wb] | Total flux linkage |
| V2m | [V] | Max. induced voltage |
| VA | [VA] | Apparent power |
| L | [H] | Inductance |
| R | [Ω] | Resistance |
| |Z| | [Ω] | Impedance |
| μ' | — | Complex permeability (real part) |
| μ'' | — | Complex permeability (imaginary part) |
| μz | — | Impedance permeability |
| tanδ | — | Loss coefficient |
| θ | [deg] | Phase angle |
| Q | — | Quality factor |
| THD | — | Total harmonic distortion |
Users can input key sample parameters (e.g., effective magnetic length, cross-sectional area, number of turns) and test conditions (e.g., frequency, peak field strength Hm, flux density Bm, voltage V2m, current I1m). The analyzer then automatically generates accurate B-H hysteresis curves and calculates the corresponding magnetic properties.
The SY-810 Remote Control Software supports seamless operation of various optional test systems.
As frequencies increase in applications like switching power supplies and DC-DC converters, core losses—primarily due to hysteresis and eddy currents—become critical. These losses lead to temperature rise and hinder miniaturization. Measuring and minimizing core loss in soft magnetic materials is key to developing more efficient, compact designs.
Understanding magnetic saturation is essential when designing with soft magnetic materials. The B-H Analyzer delivers accurate B-H curves across a wide frequency range—including into the MHz domain—making it the only tool capable of capturing saturation behavior under real-world conditions.
Materials such as silicon steel, soft iron, permalloy, and stainless steel vary significantly in magnetic performance based on manufacturing and heat treatment. The B-H Analyzer provides a reliable method for characterizing permeability and inductance, facilitating data-driven material improvements—even in common ferrite cores.
Sample parameters (Effective magnetic length, Effective cross section, number of turns of windings, etc.) and test conditions (Frequency, Maximum field strength: Hm, Maximum flux density: Bm, Maximum induced voltage: V2m, Maximum exciting current: I1m) inputs enable obtaining BH hysteresis curve and magnetic properties in value automatically.
Temperature scanner system, Single Sheet test system and DC biasing system are able to control with the SY-810 Remote control software.
46 products
